Many have heard the name "block house", but not everyone knows what kind of material it is.
Its popularity is that it is easy to giveassembly and has characteristics that are not among their counterparts. The first thing to be said is that the blockhouse has ventilation slots that are on its inside. Good ventilation allows you to maintain the integrity of the structure for many years. In production there are several types of block house:
Variety of species allows the consumer to choosefor their needs a concrete block house. Mounting of each species is almost the same, except for some trifles. In addition, they do not have the same properties, because different raw materials are used in the manufacture.
Installation of a wooden house unit on the front wall
Give the opportunity to settle the purchased materialin the place where it is planned to build a block house. The material should get used to this atmosphere. To work with the material during the installation you will need the following:
After selecting the necessary tools andThe Hausa unit can be assembled. At the initial stage, the walls are covered with sheets of vapor barrier. This is helped by a special film or parchment. Material insulation is beginning to strengthen
Isolation will not be necessary if the installationis carried out on walls that are not exposed to moisture. Further on the vapor barrier is strengthened the crate of the dried bar. The thickness of the timber, as a rule, corresponds to the thickness of the insulation material. When the crate is ready, sheets of insulation are placed in the spaces between the bars. Strengthen it with the help of special nails, which have a large round hat.
Next, the insulation is covered with a protective film, forpreventing moisture from entering. Fix the film on both sides with adhesive tape, and to the heater are attached with clamps. With insulation materials dismantled, it is now necessary to strengthen the second crate, on which the block house itself will be mounted.
The assembly process will not cause difficulties. The construction can be assembled from below as well as from above. Make sure that the tongue is always up. It is also necessary to leave gaps from the bottom and top edges of the panel in 50 mm for ventilation. After the end of the assembly, you can primer or varnish the surface for protection.
The most popular in Russia iswooden, rather than a vinyl block house. Most likely, this is due to climatic conditions, and in general a tree that is qualitatively processed creates a hormonal atmosphere that is good for health.