Sometimes such situations can occur, withwhich does not turn off the laptop through the "Start". In this case, you will need to know how to solve this problem. This can happen on all operating systems, so we decided to talk about this difficulty, as well as its resolution. After switching to the "Start" and pressing the "Shutdown" button, the computer can simply hang or the screen goes out, but the computer still remains working.
If you need to immediately turn offlaptop, but through the "Start" menu, he simply refuses to turn off, then you can turn it off manually. To do this, simply hold down the power button until the laptop is turned off. Usually it takes 5-10 seconds. However, we do not recommend that you often use this tripping method, because in fact it is dangerous for your device. But if there are no other options for disabling, then use the above.
Let's now turn to the question of the following kind: the laptop does not turn off via the "Start" - what to do first?
First, we'll deal with managementpower supply to your device. This option is suitable not only for a laptop, but also for a personal computer that completely refuses to disconnect from the Start menu. Also, the above method is suitable for all types of operating systems.
First of all you need to go to the dispatcherdevices on your computer. We recommend that you use the fastest way to go to Device Manager. To do this, just press and hold the Win key, then press the R button on the keyboard, and you will see a window in which you want to enter "devmgmt.msc", and then just press the "Enter" button.
After hitting the device manager, you shouldfind the "USB Controllers" section. Pay attention to devices such as "Root USB Hub" or "Generic USB Hub", in most cases there are several. For each such device you will need to perform special actions, which we will now describe below. Immediately click on the selected device with the left mouse button, then click with the right mouse button and select the "Properties" tab - it is located at the very bottom. Next, you will see a new window, where you need to find the tab "Power Management". Most likely, there will be a checkmark next to "Enable disabling this device to save power", you need to remove it. After the check mark is removed, you must save these parameters. Now you should try to disconnect your laptop from the Start menu. But if the laptop does not turn off via the "Start" of Windows 7, then you need to try it just reboot and try again to turn it off in this menu.
In most cases, this solutionThe problem helps, of course, if you did it right. If you still do not turn off the laptop through the "Start", then let's consider the second solution to this problem. Disconnecting the power of the laptop through this menu can interfere with the programs, as well as some services that simply do not want to be disconnected automatically, but the solution to this problem can always be found, and now we will tell you about it.
Do not turn off the laptop through the "Start" (Windows 8or 7), perhaps because after pressing the "Shutdown" button all program processes start to be disconnected, and one or several of them do not respond to these actions, so in the end the computer just hangs. The simplest and most effective way to solve this problem is to identify problematic programs and services that may be on your device.
In order to identify such programs, youyou will need to get into the system stability monitor, but it's easy. In order to open the monitoring, you need to go to the control panel and then open the support center. In the new window of this center, select the "Maintenance" tab, and then select the system stability monitor. If you do not turn off the laptop through the "Start", then in this section you can see all the failures and correct the necessary parameters.
</ p>
