To work very many online applications and gamesThe system of access to resources is based on the recognition of ports. And not all users know how to open ports via torrent on Windows 7 or in any other system. Torrent in this case acts as an additional, rather than a fixed asset. Further it will be clear why.
What is a port? In fact, the port is, roughly speaking, a kind of tunnel through which a link is made between the online resource and the end user. And it's also a secure channel with its own data encryption system.
In this case, we are talking about encryption of AES,which is generally accepted in the world of computer technology, with the only difference that it can mean a cryptosystem based on 128 or 256 bits of encoding.
Not always on the computer you can open the desired port. For the most part, this is due to the built-in Windows Firewall. In principle, the opening of the desired port is in the firewall settings is done elementary (this will be considered a little later). If it is impossible or unwilling to deal with system settings, you can solve this problem in another way using torrent applications. How to open ports through a torrent? Yes, it's very simple! Initially, you need to know at least the corresponding port number.
The first and most important thing to do is:use the firewall settings. While the issue of how to open ports via torrent on Windows 7, let's leave alone, and consider the capabilities of the system itself without the use of torrent clients.
First of all, you should check the ports themselves,present in the system and subject to activation. You can do this using the command tetstat -a, which is entered on the command line, called by the cmd line in the "Run" menu (Win + R).
Next, go into the "Control Panel" and select the firewall settings in it. There you need to create a new task with the TCP protocol in the advanced security settings mode.
Now the most important thing! First, we create a new rule. After that, follow the instructions of the "Master" (in principle, nothing much to change it is not necessary), but only the port number is set manually. For the game "Maincrack" is the number 25565, for KMS - 1688, etc.
In principle, after such procedures, especially whenmodifying the corresponding access rights settings on the router (router or ADSL modem), the problem of access to online resources will disappear by itself.
Now let's take a look at the programs calledtorrent clients. The most popular utilities are uTorrent and BitTorrent. The program settings are identical, so the solution to the question of how to open ports via torrent on Windows 8, 7, XP or 10 is applicable to the programs both ways.
So, run the program in the settings sectionlook at the point of the incoming connection. If there is a "bird" in front of the line or the line is marked in red, it seems that the connection, regardless of the selected or available port, is blocked. Use the right click and select the test line. If the test fails, go to the firewall settings.
In the client parameters themselves, solving the problem of how to open ports through the torrent, you need to specify the port of interest, and then, what is very important, perform the following settings:
But this is the solution of the question of, for example, howOpen the ports through the torrent for "SAMP", does not end. In addition to the built-in firewall system, antivirus software can also block the required port or resource.
To avoid this situation, inthe difference from the firewall, which involves adding to the list of exceptions only programs and applications, you will have to specify the official site of the same game, that is, to show the staff scanner that this source on the Internet is trustworthy.
Naturally, if the question of how to open portsthrough the torrent, after all the above described solution was not found, you should enter the settings of the router (router) and already there to engage or disable some functions like UPnP. However, this may be due solely to ZyXel routers. As practice shows, interference with other devices of this type is not required.
But sometimes it may be necessary to start the configurationparameters by connecting the router directly to the computer or laptop, then use any available Internet browser, where 192.168.0.1 or 1.1 is written in the address bar as the last two digits. Apparently (which is applicable even to modems), you will have to set up communication methods and the number of open ports that can not be blocked manually. In addition, special attention should be paid to the means of connection. In this case, the torrent client, which is available in the user's system, does not affect the connection. It's clear because if the port is blocked on the router, no program can bypass its settings.
Hence we can draw an unambiguous conclusion: before you deal with the settings of the torrent client, you need to make sure that the selected port is accessible from the system itself and is not blocked. In the rest, the firewall configuration is used first, and only then the client program.
</ p>
