STOP error: 0x0000007E, unfortunately, is observed in almost all operating systems of this family. This is indeed so. STOP failed: 0x0000007E Windows XP issued the first, and then it went-went. But each user asks himself about what is it connected with, after all, it would seem that only recently the whole system worked flawlessly, and here such ...
This failure, as a rule, initially classified can be difficult, because there may be a lot of reasons for its appearance, and all of them differ from each other.
Nevertheless, if we mark the result, itis the appearance of a blue screen either at the stage of system loading (which indicates the "shutdown" of the video driver, or in the already loaded system, when the performance of system processes for some reason becomes impossible). Although there is a direct hint of the BIOS in the notification itself, sometimes the reason may not be at all in this.
Usually as a root causeMany of these problems are indicated by the incorrect operation of the graphics accelerator. On the one hand, such an assertion takes place. But not always a crash with the STOP code: 0x0000007E is associated with this, because there are more simple and more complicated situations.
What is just the lack of space on the harddrive? As trite as this may sound, the system simply fails to start and perform some internal processes. And this is no longer a question of possible damage to system files or associated dynamic libraries. And if you dig into the settings of the obsolete BIOS firmware, then generally, as they say, you can break your leg.
But we got a little distracted. The first tool to fix the STOP stop code is 0x0000007E, of course, will be the removal of unnecessary information. Usually, user files, unlike programs, take up little space, so they, by and large, can not be touched.
The whole point of cleaning comes down to cleaningsystem services and their traces of activity. You can, of course, use the optimizer utilities, but as a rule, you will not get the most effective impact. This is due only to the fact that programs of this type do not interfere with the remaining components of the installation of the system itself or its updates, although they can remove incorrect entries from the system registry or clean computer garbage.
Therefore, to use the first needbuilt-in tool of any Windows-system, which is called through the context menu with the choice of a line of properties of the disk or partition with the transition to the service tab. Here you can clean the disk, noting both the cache, and updates, and temporary files, and a whole bunch of everything. As it is believed, the simplest cleaning of the disk space eliminates the problem with the STOP code: 0x0000007E quite often (of course, if this is not related to the damage to the components of the system itself).
As already understood, the blue screen STOP: 0x0000007E can appear in other cases. A very likely cause may be the lack or damage to system files and libraries.
What's working, what's in the loaded system througha safe mode that when starting from removable media as an optical disk or a USB flash drive, you need to use the command line launch to check the main contents of the OS directory: sfc / scannow. The verification process can take a lot of time, but you will have to suffer.
Another reason for this error is the drivers, and, more often than not, this concerns the video card.
This problem is fixed by a normal updatedriver (button on the tab of the same name in the properties menu). If this is not some non-standard equipment, the driver will be automatically installed when rebooting. In extreme cases, it can be installed from the disk, which must be delivered in the kit, or by downloading the software from the manufacturer's site with the entry of the DEV and VEN code from the equipment ID section.
If you are too lazy to deal with such things, you can install programs such as Slim Drivers or Driver Booster, which will automatically install or update drivers for you.
Finally, the most unpleasant situation can bein that the primary system itself does not properly react to "iron". This can happen only because the components installed on the motherboard, even if supported by the BIOS, are more modern than there is support.
In this case there is nothing left butflashing BIOS. In the case of the modernized system UEFI labor is not - just simply run the executable. But the old BIOS will have to work hard (especially if the system itself does not have an update point as such). And at the same time, you need to be very careful, and then you can do something that the whole system then "flies". Incorrect firmware, improper installation, interruptions to electricity during the flashing process - this is far from a complete list of all that may cause the collapse of the system. Then, not only the OS, but also the computer at power-up will cease to react to any action whatsoever.
Based on the above reasons for the appearance of such asort of errors, and even with a blue screen, you can note that many are just starting to panic. And in vain! The given error, by and large, with the equipment is connected, as they say, in so far as. In other words, it has to do with hardware only in terms of its control programs (drivers and related software), nothing more. The main emphasis in correcting such a situation concerns mainly and exclusively the program direction. And do not forget about the free space on the "screw". The elementary cleaning of the system partition from the accumulated garbage, especially with the removal of files from the previous system or the same updates, will affect the entire system so favorably that you can not even imagine.
If you give some tips at last, the sequence of actions can look like this:
Note: if the sfc / scannow command fails, you can install or use a portable version of the DLL Suite that restores or replaces damaged or missing dynamic libraries.
</ p>
