What is UltraISO?you need to talk, every user is perfectly familiar with this software. This popularity was not without reason. This program contains a bunch of tools for working with removable media, virtual drives and image files. However, its interface is not very clear for a beginner and it's rather difficult to understand the full range of possibilities. Unfortunately, we will not be able to tell about everything in one article at once, because there is a lot of information, but how to write an image to disk via UltraISO, this article will be told.
So, first, we'll figure out how to burn an image to disk via UltraISO. To do this, you will need:
Insert the disc into the computer's drive and open the program.
Add an image. To do this, click "File" and choose "Open" from the menu. In the resulting Explorer, navigate the path to the image.
Click the "Tools" button, located above the toolbar.
In the menu, click on "Burn CD image".
Set the recording parameters. Specify the drive where the disc is inserted. If you have only one, then this item is not necessary. Set the recording speed. It is advisable to select the maximum to speed up the recording process. Do not modify the recording method. In the line "File image" should be paved the path to the previously selected file, if it does not match, then change.
In the event that the RW drive, that is, a rewritable one, then click the "Erase" button.
Click the "Record" button.
After all actions, the recording starts, youyou can understand by the sound of the drive. So you learned how to burn an image to disk via UltraISO. However, as mentioned above, this program has many functions, and the one presented above is just one of them. Next, we'll tell you how to burn an image to a USB flash drive and how to create a bootable USB flash drive or disk, so we recommend that you finish reading the article to the end to find out as many features as possible.
Now, let's figure out how to burn an image to disk via UltraISO on a USB flash drive. This is done as follows:
Open the program with administrator rights.
Click the "File" button and select "Open".
In the Explorer window, navigate the path to the image file and click on "Open".
Now, from the toolbar, click "Boot" and from the menu select "Burn Hard Disk Image".
In the appeared window you need to make a setting in accordance with the image, which will be attached below this list.
Then you can press the "Record" button. If the USB flash drive is not formatted, it must be formatted in the corresponding window by clicking on the "Yes" button.
Then the recording will start. The process may take a long time, but you can use the rest of the system at this time. As a result of recording, the system will emit a characteristic sound.
Above, ways have been described how to write an image todrive through UltraISO and an image on a USB flash drive, but most often the program is used to record the boot image of operating systems. The program does it perfectly. Now we will discuss the instructions in detail how to write the image of "Windows 7" on a disk via UltraISO. By the way, the instruction will be common for other versions of "Windows", and not just for the seventh.
So, fond how to burn an image to disk via UltraISO with autorun, you need:
Run the program by inserting the USB flash drive or disk into the computer.
Click the "File" button and select "Open" in the menu.
In the Explorer window that appears, you need to open the folder where the OS image is located, what you prepared, highlight it and click "Open".
Click the "Boot" button above the toolbar.
In the menu, click on the "Write hard disk image" line.
Now format the USB flash drive or erase the disc and click on the "Record" button, which is next to "Format".
As a result, you must wait until the end of the recording. This will be indicated by the line in the process log "Recording completed". After that, you can already get the drive from the computer and use it for your own purposes.
As you can see, to recordimage to disk or flash drive, using UltraISO, a lot of experience is not needed. Following the instructions that are attached above, this process can be done in just a few minutes. It is significant that for each method the instruction is practically the same, so the probability of confusion is reduced to a minimum.
</ p>
