The quality of the assembly and the materials used inJapanese engines are beyond doubt. A good example of the perfection of technology is the products of the Suzuki brand. Boat motors with this logo are found among fishermen and hunters on small swimming means made of PVC and on solid pleasure yachts.
Which engines for swimming equipmentproduces the corporation Suzuki? Boat motors produce a separate division of the company. Production facilities are concentrated mainly in Japan. Suzuki Marine, engaged in the production of outboard motors, also collects certain models in Thailand.
All products can be conditionally divided into twogroup on engine power. The first (2-10 horsepower) are models for small boats intended for amateur use. The second group, with engine power from 15-20 liters. forces, is already intended for pleasure boats of small capacity and yachts.
The second principle of division is connected with technicalFeatures and is based on the number of working cycles. Some engines operate on the principle of fuel injection - the exhaust of exhaust gases. Others besides these also have intermediate cycles: compression and working stroke. Two-stroke engines are lighter, they are easier to set up, to maintain and cheaper. Four-stroke is an example of the perfection of technology. They are more economical, cleaner, have higher efficiency, although they cost more to maintain.
What is primarily focused on productscompany Suzuki? Boat motors, regardless of the power and number of bars, are thoroughly tested and tested before being sold. The materials and components used are of the highest quality, therefore all modifications are distinguished by increased reliability and corresponds to the declared characteristics.
Two-stroke engines (DT) are presented in fiveModifications with capacities: 2.2; 9.9; 15; thirty; 40 horsepower. Pendant boat motors (PLA) of this type are convenient in terms of frequent transportation, since they have a lightweight construction. They quickly gain momentum, are easy to manage and maintain.
Four-stroke engines (DF) are presenteda wide range of capacities (from 2.5 to 300 horsepower). And the gradation occurs with the optimal step, which allows you to accurately pick the right engine for a swimming device. The letters designate additional options: starting by the electric drive (E), plus to this also the remote control (R), the possibility of using the hydraulic lifter (T). In the notation of S / L / X, the length of the deadwood is encrypted, which corresponds to the values (381/508 / 635mm). The letter Z in coupled engines shows the possibility of reverse rotation of the screw.
With this model, the line of four-stroke engines of the company begins. The motor has a cylinder displacement of 68 cm3 and a gas tank for 1 liter of fuel. It develops revolutions up to 5750 rpm. Weight is only 13 kg. The unit is optimized for small-sized swimming equipment and is ideal for PVC boats with a fixed or removable transom. Because of its low weight, it is a good option for a backup engine for small boats and yachts.
Suzuki DF 2.5 is easy to install and easy to use. On the tiller there is a throttle control handle and a travel switch (motion - idle). The fuel tank is enough for an hour of work at maximum load and up to 4 hours in the "trolling" mode. Of the features can be identified decompression system that facilitates easy launch. For the convenience of visual control over the oil level there is an indicator. Ignition controls the electronic system. The noise level is minimal, and the exhaust emission is ultra-low.
The company's products meet the highest standardsquality. Even on low-powered engines there is an electronic fuel injection. The cylinders are supplied with the optimum mixture, which burns with maximum efficiency and minimal exhaust. Four-stroke engines of 30 horsepower are equipped with four valves per working cylinder, which ensures maximum return. For non-commercial use (up to 100 hours per season), the company guarantees reliable operation of the unit within three years if the first launch was carried out at an authorized center and the maintenance conditions were met.
How much does the Suzuki PLA 2.5 cost? Boat motors of this class can be purchased from dealers for 40,000 rubles. Models with two-stroke engines are cheaper. So, PLM Suzuki DT 15 AS is available from 100000 rub. Units starting from 30 horsepower can already be equipped with electronic ignition. The cost of Suzuki DT 40 ES is about 200,000 rubles. Motors with a capacity of 200 horsepower dealers offer from 900,000 rubles. And for Suzuki DF 300 APX will have to give 1,200,000 rubles.
The first thing to note is that almost allreviews of the company's products are positive. Users mark good technical support, implemented in the service and warranty service of the Suzuki dealer centers. Boat motors are presented in a wide range, which makes it possible to make a choice in terms of price, capacity, and equipment.
Experienced users trust the brand,that with the introduction of innovative developments, the ease of use remains. But the best characteristic can be considered the repeated messages on the forums from the owners, that the best choice for the ratio of price and quality - it's boat engines Suzuki. Reviews about their use for three years or more are the best.
</ p>
