Team shooter is a game in whichusers are divided into two opposing teams and fulfill the task assigned to them. This can be the simplest mode - to kill all the opponents and try not to perish. But there are others - for example, one team should lay a bomb and blow up the level, and the other must not allow it.
Sometimes a team needs to save hostages, sometimes -hold a certain point on the map and so on. In general, there are a lot of variants, and all of them differ from game to game. But the former remains the fact that you will need a sufficiently high level of skill to succeed in such a game. After all, you counter the same as you, users, rather than artificial intelligence. Therefore, here you will need absolutely all available methods that would help you achieve perfection. Everything is important here - even the size of the sight. Next, we'll talk about how to reduce the scope in CSS v34, as well as in earlier versions of this project.
As you can easily understand, the size of the sight isa very important parameter. After all, by default it is quite large, which does not allow you to properly aim. Therefore, many players are wondering how to reduce the scope.
In CSS V34 and in previous versions of this game it is done in various ways, so it is worth considering both options.
First of all, pay attention to the piratea version that gamers used for a long time, until an update came out that changed a lot in the game, including the teams responsible for changing the scope.
So, you need a console commandcl_crosshairscale - it is responsible for the size of your sight. If you have a value below 2000, your sight will be close to the standard one, but if you increase the value within 5000, it will become a little smaller - but not too much. If you continue increasing this parameter up to twenty thousand, then you will get a small sight.
If you need a barely visible sight, then entermeaning above forty thousand - then you can aim absolutely at any part of the body with maximum accuracy, but you still need not lose sight of the tiny point on the monitor. Now you know the command of the pirated version of the game and you understand how to reduce the sight. In CSS V34, the process is slightly different, but this will be discussed later. Now you should consider other actions that you can easily do with your sight.
Everyone who played in CSS knows that when shooting, the sight of your weapon expands. And the longer the turn, the wider it is - and the higher the spread of bullets.
Now you know how to reduce the sight in CSS, V34 is a version that will not allow you to eliminate the extension, so this advice will only suit the owners of the pirated version.
You need the cl_dynamiccrosshair command, forwhich will need to set the value of "0" - with this combination, the sight will always remain the same form that you asked it, no expansion will occur. In fact, you get a kind of laser sight for CSS, V34-version deprived users of this opportunity, and this in a sense is fair, because the use of such a team can not be called honest.
Many users are indignant over the fact,why they should necessarily have a black sight for CSS V34 or earlier (this is not important). After all, the black sight, especially if it is reduced in size, on some backgrounds is not visible at all. And this brings a lot of inconvenience.
Solve this problem with the help of the sameconsole commands - enter cl_crosshaircolor, and you will be able to change the color of your sight. The value "0" gives a green color, "1" is red, "2" is blue, "3" is yellow, and "4" is blue. As you can see, there are not so many options, but this defect was fixed during the update, so you can paint your cross in any color. For CSS V34 in general, all the commands are different, so it's time to pay attention to this version.
If you are the owner of a licensed versionthis game with the latest updates installed, then the usual team to change the size of the scope for you will not work. Now you need to use the cl_crosshairsize command. The standard sight for CSS V34 is set with the value "1", and the decrease of the sight occurs when you set a higher value for this command.
As you can see, everything is quite simple, so much so that these changes did not affect anything.
As it was said earlier, with the color of the sight inThe new version has become much better. You can still use the cl_crosshaircolor command and the five values to "4" that were available earlier. But if you want, you can set the value to "5", and get access to the color scale. In the line enter the commands cl_crosshaircolor_r, cl_crosshaircolor_g and cl_crosshaircolor_b, and after each of them, as you already guessed, you will need to enter a value from "0" to "255". This is the RGB color scale, which allows you to specify any color with the help of digital values.
If you are not familiar with this scale, you canuse any table in the network or the palette in Photoshop - there you can choose the color that you like, and you will be offered its RGB-code, which you enter in the game.
Among other things, the game was addedcommand cl_crosshairthickness, which allows you to increase or decrease not the size of the sight, but the thickness of its lines. Thus, you can make your small and comfortable, but poorly visible sight, more obvious on the screen. Fascinating games to you!
</ p>
