As everyone knows, in CS: GO you can change a lot of settings using the game console. Naturally, among these settings there is also a sight, which by default is made very large. It is clear that with such an aim a professional match can not be won, and it needs to be changed urgently. But how to do that? This manual will describe how to make a small sight in CS: GO by introducing a few fairly simple commands.
So, if you want to learn how to do itsmall sight in CS: GO, then you will need to follow the clear instructions that will be given in this article. First of all, you need to open a game console, in which you will assign commands. Thus, you can clearly see that the changes have occurred and they suit you. Later you can register all the commands that will be described below, into your config, and load it entirely together with the game itself. The first command you need to register is cl_crosshairstyle. This command affects the mobility of the sight when firing. If your goal is to make a small sight, then you definitely do not need it to expand when you fire a burst. Accordingly, you need to set this command to a value of 4 - this is the only value that makes the sight static - the others just change the type of its dynamics. So you took the first step in learning how to make a small sight in CS: GO.
What is the scope of the COP? These are four strips that form a vertical incomplete cross, at the intersection of which there is a small dot (or it is not, if you turned it off again with the help of the appropriate command). Accordingly, the reduction of the sight will occur firstly, when you will reduce the length of the strips. This will be your next step in understanding the knowledge of how to make a small scope in CS: GO. Use the cl_crosshairsize command, for which you can use any value. It is recommended to enter a value of 3, since it gives very short strips - something more will already look cumbersome, and less can get lost on the screen. Naturally, here you need to adjust the settings to your taste, so that your sight is visible and not too large. In CS: GO commands allow you to do this without much difficulty.
The cl_crosshairgap command is also extremely useful, sohow it allows you to set the distance between the lines of sight. If you set it too large, then the sight, accordingly, will expand in all directions, which is absolutely not suitable for you. Accordingly, you need to set the minimum value to 1, then the strips will be as close as possible to each other, forming a tight little sight in CS: GO, which can already be used without worrying that it will interfere with your aiming with its large size.
That's all - you got your small sights, withwith which you can now accurately target your opponent. However, we should also pay attention to the fact that such a tiny sight can easily be lost on the screen. And then you will have serious problems - it's not surprising, because in this game everyone decides a fraction of a second, and if you constantly hesitate, losing sight of sight, you will not achieve a positive result. Accordingly, you need to make the sight more noticeable - you can do it with two useful commands. cl_crosshairthickness will allow you to specify the exact thickness of the strips of the sight, and cl_crosshaircolor will give you access to the choice of color. You can use both the five standard colors, and choose your own, using the RGB scale - in the same console you can specify the depth of each of the base colors.
</ p>
