Each house has washing machines. They can be automatic or semi-automatic, with drying, spinning and other functions. They also differ in their technical characteristics, dimensions, design. In the complete set always there is an instruction on use of the washing machine and the warranty card. It is recommended to study in detail all the information that is provided in these documents.
If briefly, the manual tells aboutthe main advantages of the chosen model, safety rules, specificity, installation, preparation for washing, programs, maintenance, malfunctions and their elimination. It is useless to retell the whole instruction, however, it is worthwhile to pay attention to important aspects. It is in the instruction that it is described how to wash in a washing machine, so that it works without breakages for a long time.
The first thing you should start with is to checkcomplete. To any washing machine are attached jellied and drain hoses, fastening, wrench, transport bolts. After the device was delivered home, it is necessary to release it from the packaging. After performing simple actions, unscrew the bolts that hold the drum during transportation.
Now you need to use the washing machine. It is necessary to find the item "Installation". It talks about the most optimal place and main points, such as:
In order to connect the washing machine to thewater supply system, only new hoses should be used. The optimum pressure is 30-1000 kPa. If it exceeds the maximum, it is recommended to use a special device to reduce it.
Must be installed on the water intake hosegaskets and filter. Drainage can be connected directly to the central drain pipe or use a special attachment for the bathtub or sink.
Each device is equipped with a power button. The washing machine is switched off automatically. In some models there is a "Start / Pause" button. Thanks to it, the cycle of washing can be suspended without knocking down the settings.
To change the temperature mode, thebutton or regulator (depending on the brand). Some manufacturers equip their instruments with additional functions, for example, selection of the spin level, preliminary washing, intensive rinsing, cleaning the drum, the "no folding" mode. Detailed information on their appointment contains instructions for using a washing machine of a certain brand.
Also in all modern devices on the panelThere is a mechanical controller for selecting automatic programs. As a rule, there are at least 10. After switching on the device, a mode is chosen in which the optimal temperature, spin speed, rinse duration for a certain type of fabric is already programmed.
The most common problems of allwashing machines are leaks, problems with water supply, stopping the drum. How to solve them, help instructions for using the washing machine. There are some tips that help people to understand the problem without specialists. For example, if the drum stopped during the washing process, then the balance was most likely broken. In order to correct such an error, simply straighten things up or add a couple of others.
Sometimes washing machines are not at allare started. This does not always mean a serious engine failure. Most often, the reason is a weak water supply. In order to start the machine, it is enough to clean the filters.
Currently, a largenumber of different detergents. They differ not only in manufacturers, but also in designation. Some are used for manual washing, others are used for the cleaning process performed by an automatic washing machine. Powder with reduced foaming, air conditioning, water softener are poured into a special compartment. It is important to note that there are three divisions in the box: